Standards confirmed by productSpecifications confirmed by SKUTarget reply: 1 business daysales@msqsafe.comWhatsApp +86 139 5803 0791
How to Calculate Fall Clearance: EN 355 Guide

Review model-specific fall clearance, anchorage geometry, equipment limits and documentation before a competent person assesses the proposed system.

Fall protection – buyer guide

How to Calculate Fall Clearance: EN 355 Guide

How to calculate the clearance a fall arrest system needs before anyone works at height.

Application firstModel-level documentationTarget reply: 1 business day
Product selection by applicationS3 safety boots for industrial workplaces

Short answer: determine fall clearance from the current instructions for the exact equipment and the assessed workplace. Do not select a system using a generic distance or an EN standard number alone. If clearance cannot be confirmed, do not proceed with the proposed setup; have a competent person review the work method and protection options.

This guide is a procurement checklist, not a site-specific calculation, equipment approval or substitute for training. Manufacturer documents must cover the proposed model and configuration.

Why Clearance Is the Calculation That Gets Missed

A system can carry a standards marking without being suitable for a particular workplace. Required clearance depends on the equipment and its permitted configuration; it is not a universal allowance. Keep the measurement reference used by the manufacturer distinct from the available space measured on site.

Information Needed for a Clearance Review

Item to confirm Evidence needed
Equipment identity Exact model, compatible components and current instructions.
User and attachment Permitted user range, harness connection and working posture.
Workplace geometry Anchor position, horizontal offset, nearest obstruction and measurement reference.
System behavior Applicable manufacturer clearance chart, deployment allowances and any anchor or lifeline deflection.
Additional limits Permitted orientation, edge exposure, swing-fall hazards and rescue arrangements.

Do not combine generic allowances into a claimed safe total. A competent person should confirm the applicable calculation and site assessment before equipment is used.

Fall Factor Does Not Approve a Setup

Fall factor describes a fall scenario; it is not permission to use any particular product. Check the model’s allowed anchorage position and free-fall limits. Do not assume foot-level use or an edge application is permitted merely because a product references EN 355.

When to Review a Retractable Device

An EN 360 reference does not establish that a retractable device fits a low-clearance workplace. Verify the exact model’s instructions, clearance chart and permitted use. An insufficient-clearance finding is a reason to reassess the setup, not an automatic instruction to substitute another device.

Restraint and Positioning Are Not Fall Arrest

These systems serve different functions. Selecting between them requires a competent assessment of the task, equipment compatibility and rescue needs. Do not use a positioning belt alone as a fall-arrest system.

Frequently Asked Questions

Can a fall arrest lanyard be used after a fall?

Remove equipment involved in a fall from service and follow the manufacturer’s inspection, retirement and disposal instructions. Do not return it to use based only on its outward appearance.

What anchor strength is required?

Do not select an anchor from a generic strength figure. A competent person must establish the requirements for the proposed system, supporting structure and applicable rules, using the relevant manufacturer instructions.

Why does rescue planning matter for clearance?

Rescue arrangements must be planned before work begins. The plan must address the actual workplace and the selected system; a product listing or clearance estimate is not a rescue plan.

Next Steps for Buyers

For a sourcing review, provide the proposed application, site geometry, required market documentation and model details. Ask MSQ SAFE to confirm product availability and which model-specific documents can be supplied. A quotation does not approve a system for use. Browse fall protection, review the standards library, or request a document review.

Manufacturer References

Examples of manufacturer guidance, not evidence of MSQ SAFE certification or product equivalence:

Leave a Reply

Your email address will not be published. Required fields are marked *

Request QuoteWhatsApp
EU packaging / PPWR buyer guide

Packaging review for EU-bound orders. General application since 12 August 2026; individual requirements are phased. Confirm evidence for the specific order.

MANSHUIQIAO B2B Network

Connected sourcing capabilities

Extend a safety program with footwear materials, general footwear development and branded packaging.