Direct answer: A safety footwear pre-production sample should match the quoted model, approved bill of materials, protective components, construction, size and marking plan. Approval should connect the physical sample to the applicable documents and a written bulk inspection checklist; appearance…
Build a clearer PPE RFQ by defining workplace hazards, product category, model features, target standards, documents, quantities, branding and sample approval.
Short answer: required fall clearance is the sum of lanyard length, energy absorber deployment, worker height below the attachment point, and a safety margin. For a 2 m EN 355 lanyard the working figure is commonly around 6.5 m below…
Short answer: EN 149 classifies filtering facepiece respirators by minimum filtration efficiency — FFP1 filters at least 80%, FFP2 at least 94% and FFP3 at least 99%. The class also sets a maximum total inward leakage, which is why fit…
Short answer: EN ISO 20471 defines three classes of high-visibility clothing by the minimum area of fluorescent background and retroreflective material. Class 1 requires 0.14 m² background and 0.10 m² reflective, Class 2 requires 0.50 m² and 0.13 m², and…
Short answer: EN 397 is the industrial safety helmet standard for falling-object protection, and its chin strap must release at 150–250 N so the helmet detaches if snagged. EN 12492 is the mountaineering standard, and its chin strap must hold…
Short answer: EN 388:2016+A1:2018 rates cut resistance on an A–F scale using the TDM-100 test (ISO 13997), replacing the old 1–5 Coup test scale for high-performance materials. Level A is the lowest (2 newtons) and F the highest (30 newtons).…
Short answer: Choose construction safety shoes in five steps — assess the site’s hazards, select a protection class (S1P for dry indoor, S3 for wet/outdoor), pick the toe material (steel for max protection, composite for lighter metal-free), verify EN ISO…
Short answer: EN ISO 20345 is the international standard for safety footwear, defining protection classes from SB (toe protection only) up to S3 (toe, puncture, water resistance and tread). The class you need depends on your workplace risks — matching…
Short answer: S1P and S3 safety shoes both provide the same toe and puncture protection under EN ISO 20345 — the difference is the upper. S3 adds water resistance and a water-repellent upper, making it the right choice for wet…
Packaging review for EU-bound orders. General application since 12 August 2026; individual requirements are phased. Confirm evidence for the specific order.
MANSHUIQIAO B2B Network
Extend a safety program with footwear materials, general footwear development and branded packaging.
